Nightmaw

For the holidays and our annual club Apocalypse game last week, Jason and TJ organized a Secret Servitor among a good number of the PAGE 40k players. Everybody was secretly assigned a random person, and painted a character or other 40k model or accessory for them. I was assigned Jason himself.

At first I wasn’t sure what to put together, as he doesn’t play Imperials anymore, and what few traitor Marines he does field are elaborately built and quite unique, so I didn’t have any good bits to throw at a unique model. Then I remembered I did have a relatively uncommon and distinctive Daemon-appropriate model laying around: Nightmaw, from Forge World. I had gotten him to be basically an NPC and/or objective for the Solypsus 9 campaign but never got around to putting him together, so I’m happy to see the model put into play.

This is the final product, my first model painted for 2016:

front

left

right

Backstory

The Nightmaw model comes with an infantry character named Sayl the Faithless, and they have an excellent official story (from Forge World):

Sayl is pre-eminent among the Dolgan tribe, and his rise to ascendancy began with his allegiance to Schalkain the Vile, as one of his seven seer-apprentices. Sayl’s honeyed lies turned each acolyte against the others, and fanned the flames of suspicion into murderous strife. Eventually Schalkain was manipulated into conducting a dark rite involving Sayl and three fellow ‘loyal’ apprentices which resulted in Schalkain’s horrific death at the hands of a daemon beholden to Sayl, while the three surviving acolytes were twisted into a terrible beast known as Nightmaw. Hated and feared, Sayl the Faithless and Nightmaw now march alongside Tamurkhan the Maggot Lord.

I mean, honestly, if you’re going to hang out with a guy named Sayl the Faithless, you’re basically begging to be turned into a Gollum-wannabe…

Painting

Painting him up I used my airbrush quite a bit, spraying the tan underside, green topside, grey rock, and black base rim, starting from a white primer. The blood paint and wash wound up a bit too thick, so coloring details of the claws and teeth were lost, but he looks super gore-drenched. As Jason exclaimed approvingly “Aw, he’s grooossss!” I debated a long while about how to wash the model, and eventually went with Athonian Camoshade over everything. That turned out to be a good call, it tied everything together nicely versus a black or brown on the rock. A couple layers of it went onto key green sections like along the vertebrae to accentuate those details.

I definitely need to switch out my dull coat as he came out shinier than I would have hoped, just like my Terminators did. I was hoping it was a question of spraying too much on them. Some of the green variations are also a bit too subtle, some of the texture and other bits would show up better in photos if they were more overt. The mud brown base got washed too thickly and caught a bit of overspray while doing the rim, so it’s too black and doesn’t stand out from the rim, especially in photos.

But I’m super happy with how the rock turned out. It’s a chunk of pink foam carved up and then coated in liquid greenstuff to give more texture and protect from the primer spray. The base physically also turned out well. I didn’t want to use the stock base because it’s square, a 40mm base would have been too small for the skull collection, and 60mm looked too big. So I wound up Dremeling the bottom off an empty 50mm vitamin bottle I had laying around, which turned out near perfect. If I did it again I’d try to find something a bit deeper in order to pore some resin water effect in there and make a nice little creepy grotto, but it probably wouldn’t change the general look and feel that much.

Overall I’m pretty happy with this guy, and it was entertaining to paint something besides Marine armor.

In-Game

Appropriately, in his debut, Nightmaw lurked by some rocks throughout the Apocalypse battle royale and survived to the end. Quite unlike essentially all of the Kingbreakers. Maybe I should consider more deeply the powers of the dark ones???

40k: Alternate Maelstrom

One of the big changes to Warhammer 40,000 with 7th edition was of course the new class of official missions: Maelstrom. Upon first hearing rumors of it I was really excited, enough to pre-order the associated cards. They’ve been underutilized though because I found the final release so lackluster compared to its potential. In the tournaments and events I’ve run this year we’ve used an alternate set of Maelstrom-style tactical objectives and mission rules. They seem to work really well, addressing some of the big issues while preserving the positive aspects and adding some interesting innovations, so I thought I’d finally get around to sharing.

Into the maelstrom!

Into the maelstrom.

Just Roll Some Dice!

The heart of Maelstrom is randomized missions. In traditional 40k, players essentially compete for control over a set of objective markers placed on the board, or simply to kill all the opposing units. Maelstrom has players randomly determine smaller scoped objectives throughout the game. By drawing cards or rolling on a table, they’re directed to control specific objective markers, kill a stipulated type of unit, or even make particular actions in order to score points.

Official Maelstrom has many shortcomings. Some are easily rectified or mitigated. One such common house rule is to immediately discard impossible tactical objectives, e.g., if your opponent has no units of a necessary type. That this is so obvious an improvement only highlights how little effort GW put into their rules. It’s worth noting though what seems to be a frequently overlooked subtlety: Should tactical objectives be discarded only if they were never possible, or even if they’re impossible when drawn? The “Kill a psyker” goal highlights the difference: Can it be discarded immediately only if the opponent never had a psyker in their army, or can it also be discarded if all their psykers are merely already slain? I don’t have strong feelings either way and the two probably don’t offer vastly different experiences in practice, but this is a design decision to be made consciously.

Beyond a few such smaller problems, there are two design patterns throughout the stock Maelstrom that really gall me. Most obvious and frequently addressed in tournaments are random results. It’s absolutely deleterious to strategic play to have tactical objectives yield random amounts of victory points once achieved. A variety of reasonable house rules could address that and are frequently applied, e.g., always claim the maximum, or roll for the value when the objective is drawn. The latter actually imposes an interesting strategic evaluation of effort versus reward while maintaining the basic Maelstrom philosophy of unknown and variable objectives. That it’s such a small tweak but vastly better again highlights just how little design effort GW expends. In any event, a variety of hotfixes are possible for these objectives, but at some point you may as well just replace them.

Most upsetting to me though are the forced play tactical objectives, that award victory points simply for executing game mechanics. Instead of presenting a goal to work toward, they merely give away free points or, worse, dictate play. Many are actions you may be trivially doing anyway, such as Daemons and the “Cast a psychic power” condition. Others force you to make micro-level  moves that may not fit your army or macro-level situation at all—may the Greater Good shine on Tau that draw the “Make an assault” card! Scoring should be based on game conditions to be achieved, not making the player a puppet enacting pre-scripted actions.

Random results and forced play goals come from the same “Just roll dice & push models around!” mentality of Games Workshop that gave us random psychic powers and warlord traits. Otherwise stock Maelstrom could be solid with just a house rule or two and some card tweaks, but those aspects warrant substantial reworking.

A Games Workshop game designer shambles in to work.

A Games Workshop game designer shambles in to work.

Flexibility & Deathstars

At this point it’s worth noting what is in fact appealing about Maelstrom. The surface level attraction is just the variability of it. Sooner or later most everybody wants to play something different from the Eternal War missions that have been carried through editions under one name or another for literally decades now.

As an event organizer and game designer though, what really calls to me about that variability is the flexibility it requires of the players and their armies. To really capitalize on the Maelstrom tactical objectives, you need to be able to move all about the table, and to easily switch back and forth between killing specific units versus claiming objectives. The downside of this is that it encourages armies built around—and perhaps even spamming—small, highly mobile units. Arguably the format is imbalanced toward factions with more or better units of that style. However, given that many of the recent balance problems in 40k have revolved around deathstar units or even unstoppable single models, tipping the scales the other way is not necessarily unwelcome. In my events we mitigate the chance of going too far that way by generally also including other missions for which more “grind-em-out” style armies are perhaps better suited.

These guys are definitely here for the Maelstrom party.

These guys are definitely here for the Maelstrom party.

Logistics

In developing a revised Maelstrom mission as an event organizer rather than an individual player, I also had to keep in mind some logistics. If you don’t buy GW’s cards, stock Maelstrom missions are kind of a hassle to execute. Tracking which tactical objectives are in play, discarded, and achieved isn’t a huge deal, but it’s not nothing either. Without the cards you’re left just scribbling things down. In order to keep my events on time while enabling games to play out fully, and to alleviate the burden on our more casual, less frequent players, I really wanted to structure and streamline the bookkeeping. At the same time, this alternate format was developed for and used within small, monthly shop tournaments. In that context it’s not practical for me to print and/or make and give out whole new Maelstrom card decks as some bigger events like Adepticon have done.

A New Maelstrom

The core of my revised Maelstrom is this table of tactical objectives:

Screenshot_2015-10-21_23-37-21

[ Download as a PDF ]

Our mission packets include two copies of this for each Maelstrom mission. The players rip them out and each mark one up throughout the game for their bookkeeping. Mechanics are as follows:

  • To draw a tactical objective, roll a D66 and consult your tactical objective table. If that objective is already in play for you, has been achieved, or is scratched off, roll again. Similarly, if that objective would be provably impossible to score, e.g., your opponent has no characters remaining, roll again. Once a valid objective has been rolled, mark it as in play.
  • Targets cannot be nominated or chosen for a tactical objective marked with a † that have already been chosen for a † objective you have in play.
  • At the end of your turns, check the requirements for each tactical objective you have in play. For each fixed-value objective met, mark it as achieved and score the associated value in mission points (n.b.: not victory points). Tactical objectives with a value of X may be kept in play as long as you wish. At the end of any of your turns while in play they may be marked as achieved and scored as indicated. Once achieved, objectives are no longer considered in play and cannot be put in play or scored again.
  • Multiple objectives can be scored in a turn, caveat that you cannot achieve multiple tactical objectives with the same exact title in the same turn using the same marker(s) or unit(s). E.g., to score both Storm objectives at once, you would need to simultaneously control two separate markers in the enemy deployment zone.
  • At the end of your turn you may scratch out one of your tactical objectives in play to remove it from play.
  • Tactical objectives in play, achieved, and scratched out are not secret.

Each particular mission will then have a rule controlling the number of cards drawn, similar to the various official Maelstrom missions. Two examples we’ve used include:

  • Standing Orders. At the start of your turns, draw tactical objectives until you have a total of six in play.
  • Into the Maelstrom. At the start of your turns, draw tactical objectives until you have as many in play as the current game turn number.

Rather earning victory points directly, at game end the players are scored by comparing mission points earned via tactical objectives achieved, and awarding victory points to the higher and lower scorer according to this table:

Screenshot_2015-10-21_23-51-31

Scoring in that indirect fashion rescales the substantial number of tactical objectives that might be achieved into the 9 VP primary objective cap around which our missions are designed (they also include secondary and tertiary objectives, for a total of 20 points available in each round). In doing so the results are also normalized a bit across matches, such that one player cannot gain an insurmountable lead in the tournament by winning with a ridiculous number of tactical objectives achieved, while another victorious player falls far behind despite also trouncing their opponent but by a less ridiculous amount. In general it’s important to normalize in some fashion like this to determine the strength of a result for a Maelstrom mission, given that the actual number of tactical objectives achieved can be so variable match to match. The specific value ranges here were determined by Sascha Edelkraut and seem to work well for our 9 VP cap.

Strategy

These new tactical objectives of course eliminate random results and forced play. However, Maelstrom’s overall variability and requisite flexibility is still maintained.

Further, the X-valued objectives are a novel mechanic I haven’t seen in 40k. They enable the player to make an ongoing strategic evaluation of effort versus reward for that condition, either pushing on to try and acquire another point or to cut bait and dump it for a new, hopefully easier, objective. Objectives that require the player to nominate a target also encourage players to declare a goal and then work toward it, rather than simply hoping they draw tactical objectives for markers they’re already holding. The several variations with one player putting forward several proposals and the other choosing among them are also an interesting twist, adding a new interaction and a little bit of adversarial forward thinking.

Last but not least, these tactical objectives rightfully focus heavily on controlling objective markers. However, a number also offer opportunities to play toward pure mobility, as well as annihilation-style kill point hunting. Particularly with the X-valued mechanic enabling players to work toward them for some time or not, this gives a real, conscious strategic choice about whether or how much to focus on the various types of goals, while still staying within the overall chaotic Maelstrom framework of variable objectives and necessary flexibility. You can’t win a tough match if you can’t play for both objective markers and kill points to at least some extent, but you do have some opportunity here to strategically focus your efforts on one or the other. In general that kind of choice in both play and army construction is a major goal of the mission format for our events.

Evaluation

We’ve used this format in a number of small scale tournaments (8–16 players) this year, and it’s worked very well. The logistics for me as event organizer are trivial, I simply include multiple copies of the tactical objectives sheet above in each mission packet. For players the bookkeeping is fast and intuitive to execute once explained.

To game design, random results and forced play are eliminated while still maintaining the variability and requisite flexibility of Maelstrom play. Further, a number of novel mechanics offer new and ongoing strategic evaluations to the players, as well as affording meaningful selections between different strategic concentrations and army styles.

One notable downside of this setup is that it’s not as tactile as cards. However, for a large enough event or as a one-off occassion it would be easy to convert the objectives table and mechanics into cards. A related note though is that several players have been disappointed at not being able to use faction-specific tactical objectives published by Games Workshop. This is unfortunate, but given the rampant problems among those with random results and imbalanced conditions, I don’t see any acceptable approach but to disallow their use in tournaments.

Play!

Again, the tactical objectives sheet is available as a printable PDF. For an example of how this format has been incorporated into a tournament, check out the mission packet for our June event, The Tournament of Blood. These rules and the objectives table are released into the public domain, so please copy, edit, and use as you wish. We would though love to hear about any use of these, as well as suggestions or questions, in the comments below.  Good luck in the Maelstrom!

Descent into the Maelstrom!

Descent into the Maelstrom!

Mortalis Solypsus WIP

banner

Yesterday Colin and I got started on construction for the July PAGE/Redcap’s 40k event: Mortalis Solypsus. A bit over-ambitiously, we intend to run a full day of Zone Mortalis-styled games, capturing the fighting inside the Lab, Mine, and other installations of Solypsus 9. Note that the fluff here is that you’re fighting in huge facilities. Vehicles can fit through part of them, but may not be able to make it into narrower sections or rooms. Think NORAD, not office building.

Everybody should take note of the draft rules being collected on the event page. There are a number of restrictions and special rules to suit the indoor fighting. A basic restriction is that large vehicles are outright not permitted. Further, even permitted larger models like Dreadnoughts will not have full mobility throughout a board as they won’t fit through doorways and such. An example special rule is that blasts and templates gain Shred, and only scatter and take effect within the confines of the walls.

Although there’s a long way to go, we wanted to post some notes and pictures for both players thinking about what armies to prepare, and for the other hobbyists building boards for the event to follow along. As the boards are being constructed by several people and using a variety of styles, they will definitely vary a bit. But this is roughly how most of them will work.

If you are committed to playing in the event, please sign up on the Doodle poll so we can plan appropriately.

Colin starts measuring out walls.

Colin starts measuring out walls.

Layout

The game boards will all be 4×4, to suit the 1000 point armies. They are made up of 2×2 or 1×1 tiles, to give some variety in laying out a board. Each tile has a fixed layout of walls making corridors, generally along an 8×8 or similar grid. This gives just enough room for small vehicles such as a Rhino to move through, but in a somewhat restricted way. With other models present or scatter terrain such as debris, containers, or consoles, it may be difficult to have them turn in place and such to head in a new direction.

Line of sight is very limited by the walls. A number of walls do have doorways, but they’re staggered such that even with all of them open there is no line of sight across the board. Indirect attacks are in general not permitted, see the rules for details. Close up shooting and assault will definitely be emphasized compared to a normal game.

One of Colin's 2x2 tiles.

One of Colin’s 2×2 tiles.

Doorways

The doorways on our canonical board design are 2 inches wide and tall. This means anything up to about a Space Marine Centurion can easily move them them. Dreadnoughts, monstrous creatures, and other large models simply won’t fit. Although the tile designs generate discourage fully enclosed spaces, it will certainly be possible for troopers to huddle up away from a bigger foe and force it to take a roundabout route to them and the objective they are defending for the corpse god and/or false idols.

It doesn’t matter for gameplay purposes because they’re treated as an infinite surface, but for building purposes, the walls should be 3 to 4 inches tall. Many models need at least a 3″ wall to look right. At 4″ though the walls start to feel pretty cavernous against infantry, which might be an appropriate look for some themes.

A Kingbreaker checks out his new digs.

A Kingbreaker checks out his new digs.

Burn It Down!

Again, take a look at the draft rules to see some of the changes and special effects. And, if you are committed to participating, please sign up on the Doodle poll so we know how many people to expect.

Two WIP tiles together.

Two WIP tiles together.